Schroeder 1.184.1 Pivoting/Ratcheting Multibit Screwdriver

You looking to find the "Schroeder 1.184.1 Pivoting/Ratcheting Multibit Screwdriver" Good news! You can purchase Schroeder 1.184.1 Pivoting/Ratcheting Multibit Screwdriver with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $52.20    

Product Feature

• Six bits are stored within the translucent handle cap for easy access (Slotted, Pozidrive #1 and #2 plus Phillips #1, #2, #3)
• Patented pivotable handle provides added leverage and torque when needed
• Reversible ratcheting mechanism with integrated magnetic 1/4-Inch bit holder
• Made in Germany by Schroder
• Full Warranty

Schroeder 1.184.1 Pivoting/Ratcheting Multibit Screwdriver Review

I originally owned the Craftsman Pro version of this screw-driver OEM'ed by schroeder from early the 2000's until one of my room-mates lost/stole it :). Anyways I just recently re-purchased this guy again, and this is still my favorite tool in the box. It really allows you to put down torque on a screw. I mostly use the twist handle to get locked in screws without having to use WD-40/liquid wrench or ones that have been put in with loctite. I do remember my craftsman version having a stronger magnet at the head that was a bit hard to get the bits out ( the old bits where goldish colored), but this schroeder version wasn't a problem at all. The handle swivle (sp?) mechanism is tight and stays in place when verticle with the handle. It has a 6 hole bit holder that fits on the shaft, and also the 6 slots in the bottom of the handle. The handle slot piece is just pushed down a bit to get access and twisted in either direction. The construction is solid in your hand, and feels like a thick ABS plastic. I haven't seen a comparable interchangable screw driver by any of the major manufacturers (craftsman, snap-on, wiha, etc) that are this nice. Can't recommend this tool enough, and it's too bad you can't find schroeder tools more readily available online. I don't mind paying the extra cost for Wiha and other german made tools vs the garbage you find at home depot/lowes, except maybe klein :)

Most of the consumer Reviews tell that the "Schroeder 1.184.1 Pivoting/Ratcheting Multibit Screwdriver" are high quality item. You can read each testimony from consumers to find out cons and pros from Schroeder 1.184.1 Pivoting/Ratcheting Multibit Screwdriver ...

Davis Rigging Yachtsman Pocket Knife

You looking to find the "Davis Rigging Yachtsman Pocket Knife" Good news! You can purchase Davis Rigging Yachtsman Pocket Knife with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $14.29 Too low to display   

Product Feature

• Comes with dura-edge blade and marlin spike

Product Description

Made entirely of top quality stainless steel with dutra-edged blades. Telo Rigging knives are tools that yachtsmen will be proud to own, yet are affordable. Available in three designs: Standard Rigging Knife comes with a marlin spike. Deluxe Rigging Kinfe comes with a marlin spike, shackle key, and screwdriver. Yachtsman Pocket Knife comes with a marlin spike and shackle key.

Davis Rigging Yachtsman Pocket Knife Review

I'm editing this review once again. Why? Because I have to admit that after using this knife for going on two years now, it really is better my original and second review. Originally I gave it one star because I was utterly disappointed in it. Then I raised it to two stars because it cut much better than I thought.

Does the knife have problems? Absolutely. It is too small to be a great rigging knife and the the bail which acts as the lock for the marlin spike is awkwardly placed to allow easy use of the spike. The shackle key is also too small except for some of the smallest nuts/bolts you're going to need to turn.

With that said, I've been using the blade to cut all sorts of things for the last two years, and remains as sharp as ever. I've cut up boxes, whittled wood, used it for cutting speaker and telephone wire. scrapping stickers of metal, etc. It stays sharp and the blade is as tight as ever. As for the spike and location of the bail when it locks it in place, I've just opted not to worry about locking the spike and just pick knots with an unlocked spiked. It works fine.

The knife is small and takes up no space in your pocket. If nothing else it makes for a handy back -up and or a go to knife when you don't feel like breaking out the big rope knife to cut a small line.

It took me two years to figure it out, but the knife really is worth the money and it has proven it can hold its own if you give it a chance.

Most of the consumer Reviews tell that the "Davis Rigging Yachtsman Pocket Knife" are high quality item. You can read each testimony from consumers to find out cons and pros from Davis Rigging Yachtsman Pocket Knife ...

Wiha 27290 Slotted Screwdriver Set with Precision ESD Safe Dissipative Handle, 8 Piece

You looking to find the "Wiha 27290 Slotted Screwdriver Set with Precision ESD Safe Dissipative Handle, 8 Piece" Good news! You can purchase Wiha 27290 Slotted Screwdriver Set with Precision ESD Safe Dissipative Handle, 8 Piece with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $46.26    

Product Feature

• Handle anti-static ESD safe material 10 6 to 10 9 ohms resistance
• Allows for safe controlled dissipation of static build up
• Ideal for working on sensitive electronic components
• Wiha exclusive CRM-72 high performance tool steel blades
• Handles proportioned to blade size, molded on slim tapered fit

Product Description

Wiha 27290 slotted screwdriver set with precision ESD safe dissipative handle. Blade CVM steel. Hardened, hard chromed. Handle impact resistant, dissipative material. Comes with storage pouch. Slotted .8, 1.0, 1.2, 1.5, 2.0, 2.5, 3.0 and 3.5.

Wiha 27290 Slotted Screwdriver Set with Precision ESD Safe Dissipative Handle, 8 Piece Review

I've bought lots of those $5 kits and the blades always brake or bend because of the soft metal used. These things are rock sold and work very well. Should have busted down and paid for more to get these from the start, would have been cheaper in the long run.

Most of the consumer Reviews tell that the "Wiha 27290 Slotted Screwdriver Set with Precision ESD Safe Dissipative Handle, 8 Piece" are high quality item. You can read each testimony from consumers to find out cons and pros from Wiha 27290 Slotted Screwdriver Set with Precision ESD Safe Dissipative Handle, 8 Piece ...

Bosch 38636-01 36-Volt Litheon Drill/Driver with 2 Compact Batteries

You looking to find the "Bosch 38636-01 36-Volt Litheon Drill/Driver with 2 Compact Batteries" Good news! You can purchase Bosch 38636-01 36-Volt Litheon Drill/Driver with 2 Compact Batteries with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $359.99    

Product Feature

• Unibody Power train - keeps gearing in alignment for the most durable drive train on the market
• Steel Reinforced Collar - Provides enhanced durability when dropped on the chuck
• Dura shield Housing - Constructed to withstand real world conditions. Withstands repeated 1-story drops when the competition fails
• Hammer On/Off Ring - Easily turns hammer on and off without changing the clutch setting
• easily Accessible Brushes - Quick maintenance to minimize downtime

Product Description

1/2" 36 Volt Drill/Driver The 36-Volt Litheon brute tough hammer drill driver features a uni-body power-train that keeps gears in alignment for the most durable drive train on the market. A steel reinforced collar provides enhanced durability when dropped on the chuck. The Dura shield housing is constructed to withstand real world conditions. Hammer on/off ring easily turns hammer on and off without changing the clutch setting. Easily accessible brushes for quick maintenance with minimal down time. The ratcheting single sleeve 1/2" chuck with carbide tipped jaws have strong bit retention. Item includes : Carrying Case One Lithium-Ion Fast Charger Two Lithium-Ion 36V SlimPack Batteries One 360° Auxiliary Handle One Double-ended Bit. Features: Flexible Power System 36 Volts 1/2" Drill and Driver Bosch has been in the headlines of state of the art development for over 100 years. From the invention of the jigsaw to their ergonomic designed tools, Bosch as cared about the customer since they started business in 1886.

Bosch 38636-01 36-Volt Litheon Drill/Driver with 2 Compact Batteries Review

I purchased this drill about 1 year ago when they first came out. I was thinking with the litheon technology this tool would be a little lighter, but much more powerfull with 36 volts. I am a general contractor and have been using and abusing cordless drills for some time now. I sold my 18V Dewalt XRP 4 piece set for this drill (I hate cordless circular saws and sawsalls due to their incredibly short battery run time). This drill is not that much more powerfull than the Dewalt, but it is much more refined. The Bosch has a VERY smooth feel while driving screws and the batteries last a long time. I have two slim batteries and one fat battery. Other than the slight upgrade in battery life and power, it's not much better than the Dewalt XRP collection. You would think with a 36V rating, you'd be getting a monster cordless drill, but I think 36V (even with litheon technology) is a waste of weight. 18V is the perfect power to weight ratio. The drill has not failed me, and I have in fact been hard on it, but wait until an 18V version of the Bosch comes out.

Most of the consumer Reviews tell that the "Bosch 38636-01 36-Volt Litheon Drill/Driver with 2 Compact Batteries" are high quality item. You can read each testimony from consumers to find out cons and pros from Bosch 38636-01 36-Volt Litheon Drill/Driver with 2 Compact Batteries ...

Ka-Bar USMC 9/11 Commemorative Knife

You looking to find the "Ka-Bar USMC 9/11 Commemorative Knife" Good news! You can purchase Ka-Bar USMC 9/11 Commemorative Knife with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $62.69    

Product Feature

• High quality 7" blade made from 1095 Cro-Van steel
• Classic leather handle look
• Heavy-duty leather sheath with USMC logo
• Overall Length 11 7/8"
• Made in the USA

Product Description

Classic USMC knife with 9/11 commemorative print.

Ka-Bar USMC 9/11 Commemorative Knife Review

This knife is really cool because you can display it proudly, or use it in the harshest conditions imaginable. It's a 100% working/fighting Kabar classic. I wouldn't expect the decor on the blade to hold up under much use, but most people will probably want to use it as a display only anyway. Whatever you choose to do with it, it's a great knife!

Most of the consumer Reviews tell that the "Ka-Bar USMC 9/11 Commemorative Knife" are high quality item. You can read each testimony from consumers to find out cons and pros from Ka-Bar USMC 9/11 Commemorative Knife ...

Wilton 13403 Cam Action Drill Press Vise

You looking to find the "Wilton 13403 Cam Action Drill Press Vise" Good news! You can purchase Wilton 13403 Cam Action Drill Press Vise with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $399.00 $299.99   

Product Feature

• 8" Jaw Width
• 8 3/16" Jaw Opening
• 2" Jaw Depth
• 51 pounds

Product Description

The Wilton Cam Action Drill Press Vise features an easy-to-use top locking lever that can tighten or loosen against the workpiece, exerting 400 to 1100 lbs. of holding pressure. Mount Type: Stationary, Material: Steel, Jaw Capacity (in.): 8 3/16, Jaw Length (in.): 8, Handles (qty.): 2

Wilton 13403 Cam Action Drill Press Vise Review

I bought the Wilton 13403 8 inch vise just one month ago. I have used the same vise where I worked and was so impressed that I bought one for myself.

Granted, this vise costs three times what an imported vise sells for...but it is ten times the vise. Everything is square and parallel, the jaws shut evenly and completely. There is no burring of the movable jaw shaft from the camming mechanism as is found on the imported trash. It seems that all three rods are hardened and ground. The vise is very smooth operating, and remains that way after years of use.

The jaws are fairly hard and easily replaced. To fully appreciate this vise just set it next to an imported copy.

Most of the consumer Reviews tell that the "Wilton 13403 Cam Action Drill Press Vise" are high quality item. You can read each testimony from consumers to find out cons and pros from Wilton 13403 Cam Action Drill Press Vise ...

K-Tool International (KTI71700) 3/8in. Impact Driver Set With Impact Bits

You looking to find the "K-Tool International (KTI71700) 3/8in. Impact Driver Set With Impact Bits" Good news! You can purchase K-Tool International (KTI71700) 3/8in. Impact Driver Set With Impact Bits with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $12.83    

Product Feature

• Sets & Kits do not have warranty/ see individual p

Product Description

71700

Impact Driver With Bits

A 3/8 driver with four 5/16 hex bits for loosening rusted screws, nuts and bolts.
Packaged in a metal box.

K-Tool International (KTI71700) 3/8in. Impact Driver Set With Impact Bits Review

I searched amazon for "screw hammer" and "impact screw driver." This product came up both times. I thought it was something else, but it worked great for its MSRP... doesn't that stand for "manufacturer's suggested real purpose." I wouldn't have been able to take my motorcycle apart without it. On a side note, if you know any hot girls who would like to try something new, send 'er my way.

Most of the consumer Reviews tell that the "K-Tool International (KTI71700) 3/8in. Impact Driver Set With Impact Bits" are high quality item. You can read each testimony from consumers to find out cons and pros from K-Tool International (KTI71700) 3/8in. Impact Driver Set With Impact Bits ...

SKIL 2520-02 14.4-Volt Lithium-Ion 2-Speed Drill/Driver

You looking to find the "SKIL 2520-02 14.4-Volt Lithium-Ion 2-Speed Drill/Driver" Good news! You can purchase SKIL 2520-02 14.4-Volt Lithium-Ion 2-Speed Drill/Driver with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $89.99 $79.99   

Product Feature

• 2X More Driving Power than Ni-Cd Tool Design - To handle the toughest applications
• 3/8? 2-Speed Drill/Driver - 0-375/0-1,400 RPM
• Compact- 40% Smaller than Ni-Cd Tool Design - To minimize user fatigue and improve control
• On-Tool Work Light - Allows better visibility in hard to see areas
• Battery Fuel Gauge - So you always know when to charge your battery

Product Description

Includes 14.4V Cordless 3/8-in Drill/Driver - 2520-02, 14.4V Lithium-Ion Battery - SB14A-LI, SmartCharge Cradle Charger - SC18-LI, Double Ended Bit

SKIL 2520-02 14.4-Volt Lithium-Ion 2-Speed Drill/Driver Review

I remodeled my kitchen with this drill, it works great. Its the perfect drill for most every job and has a cool light you can use when your screwing in dark areas, the price on amazon is kinda high though. I got it on sale for less than $50, it is very powerful and doesnt bogg down when drilling. stAYS charged for long jobs and have to night battery gauge so you know ahead of time if you have to charge soon and put other stuff off during your job

Most of the consumer Reviews tell that the "SKIL 2520-02 14.4-Volt Lithium-Ion 2-Speed Drill/Driver" are high quality item. You can read each testimony from consumers to find out cons and pros from SKIL 2520-02 14.4-Volt Lithium-Ion 2-Speed Drill/Driver ...

*Malco 1/4 Stubby

You looking to find the "*Malco 1/4 Stubby" Good news! You can purchase *Malco 1/4 Stubby with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $13.51    

Product Description

HHD1T, *Malco 1/4 Stubby, Malco Products, Inc.

*Malco 1/4 Stubby Review

Malco tools are some of the best tools out there for the HVAC , Roofing and Siding fields. Keep up the good work!!!!!

Most of the consumer Reviews tell that the "*Malco 1/4 Stubby" are high quality item. You can read each testimony from consumers to find out cons and pros from *Malco 1/4 Stubby ...

NOVA 24146 1624-44 16-Inch by 24-Inch 8 Speed Wood Lathe

You looking to find the "NOVA 24146 1624-44 16-Inch by 24-Inch 8 Speed Wood Lathe" Good news! You can purchase NOVA 24146 1624-44 16-Inch by 24-Inch 8 Speed Wood Lathe with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $1,299.99    

Product Feature

• 1.5HP Traditional AC Motor
• 8 Speed range from 215rpm to 3600rpm
• Full 360 degree swivel head
• 16" swing 24" between centers extendable with accessories
• Solid cast iron

Product Description

NOVA 24146 1624-44 16-Inch x 24-Inch Wood Lathe offers a solid 1.5HP AC motor, 16" swing capacity (expandable to 29" capacity outboard with optional outrigger accessory) and 24" between centers, expandable in 20" increments with the optional bed extension accessory. Excellent entry level lathe that has enough versatility and power to give many years of turning. 8 speed range, from a low 215rpm through to a high of 3600rpm. Steel and cast iron stand included as standard equipment. Full swivel head functionality and solid cast iron components complete the package. Available in 11/4"8TPI thread. Includes 1.5HP AC Motor, Belt, Stand, 2MT Live Center, 2MT Spur/Drive Center, 3" Faceplate, 12' Tool rest, Manual and fastenings. Designed by Teknatool International, innovating since 1955. Backed by a full replacement 2-year warranty on all parts, and a further 3-Year limited warranty on all parts excluding motor, electronics, consumables, for a total of 5-Years limited warranty. Call our customer service center on 727-954-3433.

NOVA 24146 1624-44 16-Inch by 24-Inch 8 Speed Wood Lathe Review

This is my second lathe (the first one I bought second hand Central Machinery) and it is everything that Nova advertises. Well designed, well built and very affordable.
it arrived in one box which was split open and some of the contents hanging out. It's weight is about 280 lbs. and in my opinion it should be crated and on a pallet. It took me about 4 hours to assemble. It is joy to use. I recommend this over all other lathes in its class.

Most of the consumer Reviews tell that the "NOVA 24146 1624-44 16-Inch by 24-Inch 8 Speed Wood Lathe" are high quality item. You can read each testimony from consumers to find out cons and pros from NOVA 24146 1624-44 16-Inch by 24-Inch 8 Speed Wood Lathe ...