Stanley Proto J4995 Round Head Hex Key Set, 13-Piece

You looking to find the "Stanley Proto J4995 Round Head Hex Key Set, 13-Piece" Good news! You can purchase Stanley Proto J4995 Round Head Hex Key Set, 13-Piece with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $22.85 $13.07   

Product Feature

• Ball end can tighten or loosen screws at angles up to 25°
• 13 Piece Round Head Hex Key Set
• 0.82-lbs Weight

Product Description

Stanley J4995 Proto 13 Piece Round Head Hex Key Set Ball end can tighten or loosen screws at angles up to 25°. 13 Piece Round Head Hex Key Set 0.82-lbs Weight.

Stanley Proto J4995 Round Head Hex Key Set, 13-Piece Review

Great for the price. One of the best values out there. Ideal for small shop or DIY. Perfect for house repairs.

Most of the consumer Reviews tell that the "Stanley Proto J4995 Round Head Hex Key Set, 13-Piece" are high quality item. You can read each testimony from consumers to find out cons and pros from Stanley Proto J4995 Round Head Hex Key Set, 13-Piece ...

TR Tools LLC TR14V1 TITE-REACH Extension Wrench 1/4"

You looking to find the "TR Tools LLC TR14V1 TITE-REACH Extension Wrench 1/4"" Good news! You can purchase TR Tools LLC TR14V1 TITE-REACH Extension Wrench 1/4" with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $45.00    

Product Feature

• Overall length: 11"
• Overall width: 1.2"
• Length from center of gear to center of gear = 10"
• Maximum torque = 35 ft/lbs

Product Description

The 1/4" Tite-reach was designed to extend out from the nut/bolt allowing a greater degree of arc (or swing) with the driver, therefore allowing for a faster way to tighten and loosen those hard to reach areas. All you need is your existing 1/4" driver and socket set and you are ready to use the Tite-Reach!

TR Tools LLC TR14V1 TITE-REACH Extension Wrench 1/4" Review

I have only used this tool a few times, but it works well and as advertised. I have a deep toolbox, but this reaches fasteners that all my bendy ratchets and wrenches could not otherwise reach. One point, you may see a gap between the case halves of the tool and think tightening the two allen screws holding them together would close it up. It will, but the tool seems to jam then. I believe the internal chain and gears rely on having a bit of room to move inside the case to operate properly. Use gloves when holding the tool during operation. The movement of the gears and chain alternately opens and closes the gap between the case halves and can pinch your skin (experience talking here). All and all a great tool!

Most of the consumer Reviews tell that the "TR Tools LLC TR14V1 TITE-REACH Extension Wrench 1/4"" are high quality item. You can read each testimony from consumers to find out cons and pros from TR Tools LLC TR14V1 TITE-REACH Extension Wrench 1/4" ...

PFEIL "Swiss Made" Chip Carving Knife

You looking to find the "PFEIL "Swiss Made" Chip Carving Knife" Good news! You can purchase PFEIL "Swiss Made" Chip Carving Knife with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $19.49    

Product Feature

• Swiss Made
• Pre-sharpened for immediate use
• Hardwood handle
• Special alloy steel
• Rockwell 57-60 hardness

Product Description

Pfeil carving tools and Pfeil carving tool sets are "Swiss Made. Swiss Made implies reliability and precision. Pfeil carving is undoubtedly the finest carving tool on the market. Pfeil carving tools are second to none in terms of manufacturing quality and durability. The superb quality of our exclusive "Swiss Made" tools is also available to chip carvers. Forged of special alloy tool steel, blades hold their edge longer than most other knives of this type. Pre-sharpened for immediate use. Overall lengths between 5-1/4" to 7-1/2". Rc 57-60 hardness.

PFEIL "Swiss Made" Chip Carving Knife Review

I use this knife as a marking tool.It came ready to use and on time,
highly recommended. I would buy it again.

Most of the consumer Reviews tell that the "PFEIL "Swiss Made" Chip Carving Knife" are high quality item. You can read each testimony from consumers to find out cons and pros from PFEIL "Swiss Made" Chip Carving Knife ...

Magnum Grace Ii Knife

You looking to find the "Magnum Grace Ii Knife" Good news! You can purchase Magnum Grace Ii Knife with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $15.56 $10.32   

Product Feature

• 440 stainless steel blade
• Lockback mechanism
• Laminated wood insets

Product Description

An eye-catcher, with two insets of wood integrated into the handle with attractive etching. Blade length: 3 1/2". Overall length: 8". Weight: 4.8 oz.

Magnum Grace Ii Knife Review

The good:

Well constructed as are all the Boker Magnum series knives I have seen (I have bought two.) For chinese made knives the quality control seems to be well above average.

This is a very attractive knife with decent (440) stainless blade, sharp out of box. Locks open firmly with no play, no visible fit and finish issues. Oh, and the price- $10 is more than reasonable especially considering...

The bad:

For a knife in the style of a "gentlemans folder," the knife is ABSURDLY large and heavy. The listing I purchased it from on Amazon did not have the specs on it. Obviously this is partly my fault (I should have researched it more first, on a more expensive knife I surely would have.) However I was expecting, due to it's decorative design, to be the sort of knife you could comfortably carry even in a suit pocket. I was surprised to find a knife 8 inches long, (3 1/2 inch blade) and heavy- for those familiar with it, this is as large as the famous Buck 110 folding hunter knife. In some ways this makes it an even better value I suppose but I was personally a bit disappointed. I would feel uncomfortable pulling this out in any formal, and certainly in any urban, setting.

Anyway a very fine knife indeed for the money but unless you are 6' 5" and 250 pounds this may not be a comfortable carry for you. Recommended nonetheless.

Most of the consumer Reviews tell that the "Magnum Grace Ii Knife" are high quality item. You can read each testimony from consumers to find out cons and pros from Magnum Grace Ii Knife ...

GearWrench 81339F 1/2-Inch Drive Non Quick Release Ratchet Repair Kit

You looking to find the "GearWrench 81339F 1/2-Inch Drive Non Quick Release Ratchet Repair Kit" Good news! You can purchase GearWrench 81339F 1/2-Inch Drive Non Quick Release Ratchet Repair Kit with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $14.04 $14.00   

Product Feature

• Repair Kit allows you to recondition the GearWrench ratchet you have come to love.
• Includes all the components needed for a successful recondition.
• Instruction sheet with easy to follow directions.

Product Description

The GearWrench 84 Tooth ratchet repair kit for use with the following 1/2" ratchet item numbers: 81303F, 81304F and 81306F.

GearWrench 81339F 1/2-Inch Drive Non Quick Release Ratchet Repair Kit Review

Used this to replace Armstrong 1/2" ratchet guts. A lot smoother.. more teeth. Works great came with extra small o-ring. Took off a couple lug nuts torqued to 130 with it to test. no problems so far.

Most of the consumer Reviews tell that the "GearWrench 81339F 1/2-Inch Drive Non Quick Release Ratchet Repair Kit" are high quality item. You can read each testimony from consumers to find out cons and pros from GearWrench 81339F 1/2-Inch Drive Non Quick Release Ratchet Repair Kit ...

DE STA CO 207-U 207 Vertical Hold Down Action Clamp with U-Shaped Bar and Flanged Base

You looking to find the "DE STA CO 207-U 207 Vertical Hold Down Action Clamp with U-Shaped Bar and Flanged Base" Good news! You can purchase DE STA CO 207-U 207 Vertical Hold Down Action Clamp with U-Shaped Bar and Flanged Base with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $13.53    

Product Feature

• Vertical Handle Hold Down

Product Description

The 207 world clamp series is an expansion of our exisiting line of series 207 clamps. The world clamps feature a longer handle - over a 1" longer than previous domestic models - making them much easier to use. In addition, this "universal" handle, standard on domestic and global versions, includes an ergonomic grip for greater operator comfort. All other dimensions and specifications for the 207 series are the same. Bolt retainer is furnished with solid bar models, and two flanged washers with "U" bar models. Accommodates any 5/16" spindle assembly (not supplied).

DE STA CO 207-U 207 Vertical Hold Down Action Clamp with U-Shaped Bar and Flanged Base Review

It stays firmly locked down & the adjustment is easy to maneuver. It is a reliable product. I'll buy it again.

Most of the consumer Reviews tell that the "DE STA CO 207-U 207 Vertical Hold Down Action Clamp with U-Shaped Bar and Flanged Base" are high quality item. You can read each testimony from consumers to find out cons and pros from DE STA CO 207-U 207 Vertical Hold Down Action Clamp with U-Shaped Bar and Flanged Base ...

Imperial 5602 Retaining 'E' Clip - 1/4" Pkg/100

You looking to find the "Imperial 5602 Retaining 'E' Clip - 1/4" Pkg/100" Good news! You can purchase Imperial 5602 Retaining 'E' Clip - 1/4" Pkg/100 with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $18.49    

Product Feature

• "IMPERIAL" E CLIP
• Shaft Size: 1/4"
• E-Clip,Retaining.
• Used for greasable roller shaft.
• Plain black steel construction.

Product Description

"IMPERIAL" E CLIPShaft Size: 1/4"E-Clip,Retaining.Used for greasable roller shaft.Plain black steel construction.Quantity: 100 per package.

Imperial 5602 Retaining 'E' Clip - 1/4" Pkg/100 Review

Not much to write about here but the product is as described, the quality good, and it gets the job done.

Most of the consumer Reviews tell that the "Imperial 5602 Retaining 'E' Clip - 1/4" Pkg/100" are high quality item. You can read each testimony from consumers to find out cons and pros from Imperial 5602 Retaining 'E' Clip - 1/4" Pkg/100 ...