Graintex SH1608 Sledge Hammer 8 Lb, 36-Inch Fiberglass Handle

You looking to find the "Graintex SH1608 Sledge Hammer 8 Lb, 36-Inch Fiberglass Handle" Good news! You can purchase Graintex SH1608 Sledge Hammer 8 Lb, 36-Inch Fiberglass Handle with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $35.50 $28.99   

Product Feature

• Drop Forged Head
• Heat Treated & Tempered
• 36-Inch Fiberglass Handle with Rubber Grip
• Epoxy Bonded
• Milled Face

Product Description

The Graintex SH1608 8-Pound Sledge Hammer with 36-inch Fiberglass Handle is your general sledge hammer that is used for demolition and deconstruction. The 36-inch handle gives you the leverage needed to let the hammer do its job. The 8-pound sledge head has a milled face and is epoxy bonded to the fiberglass handle.

Features:

• 36-inch fiberglass handle with rubber grip
• Heat treated and tempered
• Drop forged head
• Epoxy bonded
• Milled face

What's In The Box:

• Graintex SH1608 8-Pound Sledge Hammer with 36-inch Fiberglass Handle

Graintex SH1608 Sledge Hammer 8 Lb, 36-Inch Fiberglass Handle Review

very well made and very well priced; I didn't need anything more hefty than this to suit my needs; I feel it was a good investment.

Most of the consumer Reviews tell that the "Graintex SH1608 Sledge Hammer 8 Lb, 36-Inch Fiberglass Handle" are high quality item. You can read each testimony from consumers to find out cons and pros from Graintex SH1608 Sledge Hammer 8 Lb, 36-Inch Fiberglass Handle ...

Advanced Tool Design Model ATD-374 110 Piece Metric Grease Fitting Assortment

You looking to find the "Advanced Tool Design Model ATD-374 110 Piece Metric Grease Fitting Assortment" Good news! You can purchase Advanced Tool Design Model ATD-374 110 Piece Metric Grease Fitting Assortment with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $26.89 $24.84   

Product Feature

• Packed in a rugged plastic storage case.
• Packed in a rugged plastic storage case

Product Description

Contains: (30) straight 6mm grease zerk fitting, (20) 90? 6mm grease zerk fitting, (20) straight 8mm grease zerk fitting, (10) 90? 8mm grease zerk fitting, (20) straight 10mm grease zerk fitting and (10) 90? 10mm grease zerk fitting.

Advanced Tool Design Model ATD-374 110 Piece Metric Grease Fitting Assortment Review

I Have to say I have not used these yet but just the look of the threads seem of poor quality

Most of the consumer Reviews tell that the "Advanced Tool Design Model ATD-374 110 Piece Metric Grease Fitting Assortment" are high quality item. You can read each testimony from consumers to find out cons and pros from Advanced Tool Design Model ATD-374 110 Piece Metric Grease Fitting Assortment ...

KR Tools 95039 Pro Series Counter Display Stubby Hammer

You looking to find the "KR Tools 95039 Pro Series Counter Display Stubby Hammer" Good news! You can purchase KR Tools 95039 Pro Series Counter Display Stubby Hammer with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

   

Product Feature

• Heavy Duty frame
• Comfort soft grip handle
• Lifetime Warranty

KR Tools 95039 Pro Series Counter Display Stubby Hammer Review

I bought two of these from Sears. I use them regularly for setting up various stakes as they are small enough to be easily kept with each set of stakes. The hammer has good heft/weight while being only about 6" tall (and about 5" wide). I ended up misplacing one of the hammers and just bought an eVolve brand replacement from Sears. That new hammer does not have as large a head as this KR Tools hammer. But at least I still have one left and know where I can get another one.

Most of the consumer Reviews tell that the "KR Tools 95039 Pro Series Counter Display Stubby Hammer" are high quality item. You can read each testimony from consumers to find out cons and pros from KR Tools 95039 Pro Series Counter Display Stubby Hammer ...

Mantis Knife "Seymour" Fixed Blade Tactical/Hunting Knife HYBRID

You looking to find the "Mantis Knife "Seymour" Fixed Blade Tactical/Hunting Knife HYBRID" Good news! You can purchase Mantis Knife "Seymour" Fixed Blade Tactical/Hunting Knife HYBRID with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $26.92 $20.43   

Product Feature

• 3 inch 420HC Skinner type blade
• Fixed Blade
• Integrated tire rubber offers superior grip
• Custom Sheath with clip

Product Description

The TA-2 has a great shape. It's slight re-curve coupled with it's molded recycled rubber handle make for a comfortable and extremely sturdy grip in forward OR reverse.

Mantis Knife "Seymour" Fixed Blade Tactical/Hunting Knife HYBRID Review

I just got this knife and haven't used it yet. So far, it's a little disappointing though.

The knife is reasonably sharp, but won't shave hair off my arm. I expect a brand-new, quality knife to shave me.

The handle is long and the blade is short. Kind of looks funny, but serviceable. The handle is quite comfortable and gives a good grip.

The sheath leaves something to be desired. The clip holds great, but it leaves the knife riding too high for my tastes. It is also a bear to remove. I had to get a screwdriver to pry the clip off my jeans. The knife is reasonably easy to draw, but the sheath still retains it snugly. That is good. The knife is a pain to try to re-sheath though, and that is a problem.

I wanted to try this one because I heard good things about Mantis knives, and because I understood it was made in the USA. The knife and package are not marked as to country of origin though, so I'm not sure where it's made.

I may come to like this one better when I get to use it, but right now I don't consider it a great knife for $30. The exposed tang at the butt does at least allow for batoning point-first. The knife looks great, but unless it performs great, I'll have to leave this a 3 star rating.

UPDATE: I have tried using this knife to cut cardboard, and it failed pretty miserably. It has poor edge geometry and dulls quickly. After three or four (difficult) cuts, it quit cutting and started tearing. You can buy a "Made in USA" KaBar Becker Necker for the same money, and it will perform better. Half this price will buy a "Made in Sweden" Mora knife that cuts better. Don't waste your money on a Mantis.

Most of the consumer Reviews tell that the "Mantis Knife "Seymour" Fixed Blade Tactical/Hunting Knife HYBRID" are high quality item. You can read each testimony from consumers to find out cons and pros from Mantis Knife "Seymour" Fixed Blade Tactical/Hunting Knife HYBRID ...

Makita AN901 Round Head 1-3/4-Inch to 3-1/2-Inch Coil Framing Nailer

You looking to find the "Makita AN901 Round Head 1-3/4-Inch to 3-1/2-Inch Coil Framing Nailer" Good news! You can purchase Makita AN901 Round Head 1-3/4-Inch to 3-1/2-Inch Coil Framing Nailer with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $499.00 $489.09   

Product Feature

• Fires standard 1-3/4" to 3-1/2" coil framing nails
• Easy load canister provides maximum versatility
• Nail mode selector provides sequential or bounce fire for increased flexibility
• 9 quick dial adjustments for precise control of nail depth
• Built-in air filter prevents dust or foreign matter from entering the tool
• "Tool-less" depth adjustment with 9 depth settings in increments of 1/16"
• 3-mode selector switch (contact, sequential, lock) allows user control over nailing options
• AF505
• AF633
• AN453
• AN610H
• AN611
• AN911H
• AN923
• AT1150A
• AT2550A
• AT638
• Built-in air filter minimizes dust and debris from entering the tool
• Drives 1-3/4" to 3-1/2" coil framing nails
• Easy loading canister with nail size adjustment provides maximum versatility
• Hex Wrench 4 (783202-0)
• Multi-directional exhaust port directs the exhaust air away from the operator
• No-mar Tip (421658-6)
• Oil Supply (181434-7)
• Rubber bumper protects tool housing
• Rubberized handle for better fit and added comfort
• Safety Goggles (191687-A)
• Sharp, pronounced spurs grip wood for controlled nailing at an angle
• Silent sheet reduces noise when disconnecting coupler
• The most powerful nailer in its class
• Tool hook can be installed on either side of tool

Product Description

3-mode selector switch (contact, sequential, lock) allows user control over nailing options

Makita AN901 Round Head 1-3/4-Inch to 3-1/2-Inch Coil Framing Nailer Review

I am a general contractor and have been using this tool on a house I am currently building. I decide on a coil nailer because it was going to be used primarily for nailing off shear and flooring. It came down to this one or the Max nailer and I chose this one because it is lighter the max by almost a pound. It is well balanced and has more than enough power to do anything I have asked it to do. I find myself using it to do a lot of framing I would normally do by hand and even with a full coil of 16d nails, it is light enough to use for extended periods of time. Highly recommended.

Most of the consumer Reviews tell that the "Makita AN901 Round Head 1-3/4-Inch to 3-1/2-Inch Coil Framing Nailer" are high quality item. You can read each testimony from consumers to find out cons and pros from Makita AN901 Round Head 1-3/4-Inch to 3-1/2-Inch Coil Framing Nailer ...

Wiha 28087 8-Piece Torx ESD Safe Precision Interchangeable Blade Set

You looking to find the "Wiha 28087 8-Piece Torx ESD Safe Precision Interchangeable Blade Set" Good news! You can purchase Wiha 28087 8-Piece Torx ESD Safe Precision Interchangeable Blade Set with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $45.70    

Product Feature

• ESD safe handles conductive dissipative
• Surface resistance 106-to-109-Ohms
• Tips precision machined for exact fit
• Anti corrosion surface protected blades
• Super hardened CRM-72 tool steel
• Wiha has been making Premium Tools For Over 60 Years
• Wiha tools are made to ISO quality standards.

Product Description

Wiha SYSTEM 4 Torx Precision Interchangeable Blade Set 8 pc. Set includes ESD Safe collet lock handle and 7 Wiha interchangeable blades. Torx on standard blades: T3, T4, T5 Torx on reversible blades: T6, T7, T8, T9, T10, T15, T20. ESD anti-static vinyl pouch set.

Wiha 28087 8-Piece Torx ESD Safe Precision Interchangeable Blade Set Review

Good, professional quality hand tools. "Precision" in a limited sense, but they fit the tiny fasteners they're supposed to, and the handle fits the hand well too. The handle has a clip on it, as though it's something likely to be carried in your shirt pocket,,,,, well, it's not a shirt pocket screwdriver. Still sometimes a clip might possibly be handy, so no loss. The handle actually has a collet/nut on it so you can adjust the protruding length of the shank.

I'd like it better if they were USA made, but I've pretty much given up on that. At least they're NOT chinese or "pacific rim" junk.

Most of the consumer Reviews tell that the "Wiha 28087 8-Piece Torx ESD Safe Precision Interchangeable Blade Set" are high quality item. You can read each testimony from consumers to find out cons and pros from Wiha 28087 8-Piece Torx ESD Safe Precision Interchangeable Blade Set ...

CUTTING TIP FOR SOLDERING GUN

You looking to find the "CUTTING TIP FOR SOLDERING GUN" Good news! You can purchase CUTTING TIP FOR SOLDERING GUN with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $5.99    

Product Feature

• Sale Unit: EACH

Product Description

Weller 6150 [PRICE is per EACH]

CUTTING TIP FOR SOLDERING GUN Review

In my city of 25 thousand and neighboring area, not one of 6 hardware stores had this very needed item. Thanksd to Amazon I found these and am greatful.

Most of the consumer Reviews tell that the "CUTTING TIP FOR SOLDERING GUN" are high quality item. You can read each testimony from consumers to find out cons and pros from CUTTING TIP FOR SOLDERING GUN ...